Y-Type Strainer is Y-shaped, one end is to make water and other fluid through, and the other end is to precipitate waste and impurities. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, constant water level valve or other equipment. Its function is to remove impurities in the water, so as to protect the normal operation of the valve and equipment. The water to be treated by the filter enters the body from the water inlet, and the impurities in the water deposit In the stainless steel screen, the resulting pressure difference. When the pressure difference reaches the set value, the electric controller sends signals to the hydraulic control valve and drive motor, causing the following actions: the motor drives the brush to rotate to clean the filter element, and the control valve is opened to drain. The whole cleaning process only takes tens of seconds. When the cleaning is finished, the control valve is closed, the motor stops rotating, and the system is closed The system returns to its original state and begins to enter the next filtration process. After the installation of the equipment, the technical personnel will carry out the debugging, set the filtration time and cleaning conversion time, the water to be treated will enter the machine body from the water inlet, and the filter will start to work normally.
Product Name: PN10/16 Y -Strainer
Basic standard
·Flange end:EN1092-2;1997 PN10/16
·Test:ISO5208
Feature
·Norminal Pressure(mpa):1.6
·Strength test:2.46mpa
·Suitable medium:-10-200ºC
·Suitable temperature:water.oil,steam
Main parts and materials
DN |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
300 |
400 |
(2") |
(2 1/2") |
(3") |
(4") |
(5") |
(6"0 |
(8") |
(10") |
(12") |
(14") |
(16") |
L(mm) |
320 |
350 |
373 |
390 |
410 |
430 |
650 |
775 |
900 |
1025 |
1150 |
H(mm) |
208 |
253 |
268 |
286 |
295 |
318 |
450 |
503 |
578 |
598 |
618 |
H1(mm) |
195 |
245 |
295 |
344 |
415 |
485 |
602 |
710 |
815 |
844 |
872 |
|
Parts Name |
Body |
Filter |
O-ring |
Material |
Cast Iron, Cast Steel |
Stainless Steel |
NBR |
|
Product Standard: GB/T17241.6 JB/T79.1 |
Product Process
Surface Treatment: Epoxy Resin Coating
OEM service
Having our own factory and professional technicians,we welcome OEM orders as well.We can design and produce the specific product you need according to your detail information.
After-sale Service
Our enthusiastic and friendly customer service representatives are ready to assist with any questions or problems.