Z15X-16q Industrial Silk Mouth Soft Seal Gate Valve

• Media: Water
• Temperature: Ordinary Temperature
• Type: Straight-through
• Material: Cast Iron
• Connection Form: Flange
• Pressure: Ordinary Pressure
• Model NO.: Z15X-16Q
• Actuator: Manual
• Seal Surface: Parallel Gate Valve
• Thread Position of Valve Rod: Outside Gate Valve
• Usage: Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: GB
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Service: OEM/ODM
• Shelf Life: 18 Months
• Transport Package: Poly Bag, Inner Box, Outer Carton /and Pallet
• Specification: DN15-50
• Trademark: Daisen
• Origin: China
• HS Code: 8481804090
• Production Capacity: 60000PCS Per Year

Product Description

 

 

Size	DN15	DN20	DN25	DN40	DN50
L(mm)	64	71	82	100	110
H(mm)	87.5	96	122	155	177
C(mm)	60	66	79	97	110
D(mm)	15	20	25	40	50

 

Parts Name	Body	Bonnet	Disc	Stem	Wiper ring	O-rings	Bonnet Hex.bolts	Gland	Hand wheel
Materials	QT500 Ductile Iron		QT500+EPDM,Ductile Iron+EPDM	2Cr13,Stainless steel 420S37	EPDM		Q235,Stainless Steel	ZCuZn-40Pb2,Brass	HT150,Cast Iron

 

 

 

Introduction of soft sealing gate valve flange

A Traditional valve intracavity a cavity at the bottom, making it easy for debris deposition, and could not shut down close, resulting in leakage of the valve
formation at the bottom, it is not easy plot debris, fluid unimpeded, switching easily.
B Ram EPDM rubber-coated surface are selected materials used meet the health standards gB/T17219-1998, without any water or rust corrosion
phenomenon for Health drink And connecting with the ram Solid, not good memory loss and flexibility. Seal reliable, anti-wear, leakage rate of zero.
C Valve internal and external use nontoxic coating resins, resin meet sanitary conditions, and enhance decay resistance capacity, eliminating the secondary
pollution on the water quality.
D Stem nut embedded gate, so that it will not loosen or vulnerable to corrosion, long service life.
E. The seal design uses threeo'-rings can be kept water replacement, maintenance, maintenance.

Main technique number
Design Standard:CJ216- -2005 BS5163
Face To Face:BS5163/ISO5752 3 Series
End Flange:BS4504/BS EN 1092
Test:EN1074
Test Pressure Mpa
Dody:2.4/1.5
Seat:1.76/1.1
Usable Mediums:Fresh water, air or other gas, oil, ternperature is not higher than 70ºC